|
|
 |
 |
| |
|
The Mobri radar reflector represents a significant improvement in passive radar reflectors. The design offers many advantage foremost being a very large radar cross section as well as minimal wind noise, light weight, and less chance of chafe to the sails and rigging.
Mobri radar reflectors are available in 5 sizes covering coastal and off-shore passage for sail boats and power boats.
The Mobri models S-2 and S-4 are designed to be mounted in the rigging of sailboats - ideally in the shrouds or back stay as high as possible above the deck and away from the shadow of the mast.
And Mobri models M-2, M-3, and M-4 are most suitable for use on power boats - again, mounting in a vertical position as high as possible over the deck away from the shadow of other equipment.
|
Click on the model number below to go directly to the specific reflector specification.
|
|
|
|
|
 |
The most popular model.
Choose the S-2 if you sail along the coast.
Noiseless
Light weight
Low windage
Less chance of chafe to the sails and rigging
|
The mobri S-2 is designed to be mounted in the rigging of sailboats.The best performance is achieved when the mobri radar reflector is mounted in a vertical position as high as possible above the deck, a minimum of 4 mtr./13 ft. is recommended. It should be mounted in the shrouds away from the "shadow" of the mast. Mounting eyes are molded in the structure at top and bottom. Durable lashing materials should be used to attach it to the standing rigging.
Radar cross section: 2 m².
Color: Black or white
Dimensions: 2" x 23"
Weight: 13 oz
|
|
|
|
 |
The greatest reflective capacity.
Choose the S-4 if you sail off shore.
Noiseless
Light weight
Low windage
Less chance of chafe to the sails and rigging
|
The mobri S-4 is designed to be mounted in the rigging of sailboats.The best performance is achieved when the mobri radar reflector is mounted in a vertical position as high as possible above the deck, a minimum of 4 mtr./13 ft. is recommeded. It should be mounted in the shrouds away from the "shadow" of the mast. Mounting eyes are moulded in the structure at top and bottom. Durable lashing materials should be used to attach it to the standing rigging.
It provides a radar cross section of 4 m².
Color: Black only
Dimensions: 4" x 23"
Weight: 31 oz
|
|
|
|
|
 |
Can be laid down - tilting bracket
Choose the M-2 if you sail along the coast
Easy to remove
Noiseless
Light weight
Low windage
|
The mobri M-2 is designed with a mounting bracket and is most suitable for the use of power boats. The best performance is achieved when the mobri radar reflector is mounted in a vertical position as high as possible over the deck. It should be mounted on the coach roof, a targa or a tunatower, away from the "shadow" of other equipment such as antennas. The mounting bracket on the M-2 has 3 hols for fastners. The radar reflector is easy to remove when not in use.
Radar cross section: 2 m².
Color: Black
Dimensions: 2" x 23"
Weight: 23 oz
|
|
|
|
|
 |
For power boats and inflatables
Easy to remove and stow away
Choose the M-3 for offshore power boats
Noiseless
Light weight
Low windage
|
The mobri M-3 is designed with a mounting bracket and is most suitable for the use of power boats. The best performance is achieved when the mobri radar reflector is mounted in a vertical position as high as possible over the deck. It should be mounted on the coach roof, a targa or a tunatower, away from the "shadow" of other equipment such as antennas. The mounting bracket on the M-3 has 4 hols for fastners. The radar reflector is easy to remove when not in use.
Radar cross section: 3 m².
Color: Black and white
Dimensions: 4" x 15"
Weight: 27 oz
|
|
|
|
|
|
For power boats and inflatables
Easy to remove and stow away
Choose the M-4 for offshore power boats
Noiseless
Light weight
Low windage
|
The mobri M-4 is designed with a mounting bracket and is most suitable for the use of power boats. The best performance is achieved when the mobri radar reflector is mounted in a vertical position as high as possible over the deck. It should be mounted on the coach roof, a targa or a tunatower, away from the "shadow" of other equipment such as antennas. The mounting bracket on the M-4 has 4 hols for fastners. The radar reflector is easy to remove when not in use.
IRadar cross section: 4 m².
Color: Black and white
Dimensions: 4" x 23
Weight: 33 oz
|
|
|
